E-A2Y 0,6/1 kV Application
The cable is desioned to be used in three-phase alternating networks with eficient earthing ofthe centre. installation in the air for overhead inessuspended on poles etc. The cable has to be unwound from a cable reel over rolers and drawn for all cores. Unwinding on the ground is notpermitted. Right-handed twist of cores.Instalation of the product should only be caried out by personmel trained and qualified for electrical works. The product is designed according torecoanized standards, Applicable rules of installation must be applied at all times.
E-A2Y 0,6/1 kV Construction
1.Aluminium conductor2.Polyethylene insulation
E-A2Y 0,6/1 kV Mechanical and electrical properties
| No. of cores and cross-section mm2 |
Shape of conductor |
Nominal insulation thickness mm |
Diameter approx. mm |
Cable mass approx. kg/km |
Bending radius mm |
DC resistance at 20 °C (min.) Ω/km |
Current carrying A |
Short circuit current-equiv. kA |
Time heating constant sec |
| 2x25 | RMV | 1,4 | 17 | 199 | 204 | 1,20 | 85 | 1,4 | 1,4 |
| 2x35 | RMV | 1,4 | 20 | 266 | 240 | 0,868 | 106 | 2,0 | 2,0 |
| 3x25 | RMV | 1,4 | 19 | 300 | 228 | 1,20 | 85 | 1,4 | 1,4 |
| 3x35 | RMV | 1,4 | 21 | 400 | 252 | 0,868 | 106 | 2,0 | 2,0 |
| 3x50 | RMV | 1,6 | 24 | 523 | 288 | 0,641 | 133 | 2,9 | 2,9 |
| 4x25 | RMV | 1,4 | 21 | 401 | 252 | 1,20 | 85 | 1,4 | 1,4 |
| 4x35 | RMV | 1,4 | 24 | 534 | 288 | 0,868 | 106 | 2,0 | 2,0 |
| 4x50 | RMV | 1,6 | 27 | 698 | 324 | 0,641 | 133 | 2,9 | 2,9 |
| 4x70 | RMV | 1,6 | 31 | 966 | 372 | 0,443 | 170 | 4,0 | 4,0 |
| 4x95 | RMV | 1,8 | 36 | 1303 | 432 | 0,320 | 196 | 5,5 | 5,5 |
| 4x120 | RMV | 1,8 | 40 | 1599 | 480 | 0,253 | 240 | 6,9 | 6,9 |
| 4x70+1x35 | RMV | 1,6/1,4 | 31 | 1099 | 372 | 0,443 | 170 | 4,0 | 577 |
